To start we must apply heat to the back cover, and with the help of a fine tool and a suction cup we open enough space that allows us to introduce a plastic spike so as not to damage the back shell.

We extract the ten Phillips screws (PH # 00) that hold the intermediate housing with the NFC antenna, and with the help of a flat tool we will disengage the intermediate housing.

Before starting to disassemble any component of the phone, disconnect the flex from the battery.

We disconnect and remove the TOF module.

We disconnect and remove the rear cameras.

We disconnect all the components that are connected to the motherboard.

Remove the Phillips screw (PH # 00) that holds the motherboard, and remove it.

In order to finish we will take off the damaged vibrator helping us with tweezers sufficiently flat.