To begin with we will have to take off the back cover, for this we will use a fine enough prong to take off the casing. If necessary, before introducing the tool we could apply heat to the housing with a hot air gun or a thermal mat.
Step 2 Adhesive and screws
Take off the adhesive and remove the two Phillips screws (PH # 00) that hold the charging connector.
Step 3 Upper housing
We extract the eight Phillips screws (PH # 00) that hold the upper housing, and with the help of a flat tool, we will unhook it.
Step 4 Flex with charging connector
Finally disconnect the flex connector with load that we will replace the motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.