First of all we must remove the tray from the cards.
Step 2 Back case
With the help of a tool that is thin enough, we uncouple all the edges of the casing, taking care not to damage it too much. And we have unhooked the flex from the fingerprint reader to work more comfortably.
Step 3 Bottom shield
Remove the two Phillips screws (PH # 00) that hold the shield and unhook it.
Step 4 Speaker
We extract the six Phillips screws (PH # 00) that hold the speaker module and we can remove it.
Step 5 Auxiliary plate
We disconnect the coaxial cable and the interconnection flex from the auxiliary plate, and with the help of a flat tool we take off the auxiliary plate.
Step 6 Vibrator
Finally we will take off the vibrator that we are going to replace.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.