First of all we must remove the tray from the cards.
Step 2 Back case
With the help of a tool that is thin enough, we uncouple all the edges of the casing, taking care not to damage it too much. And we have unhooked the flex from the fingerprint reader to work more comfortably.
Step 3 Shields
Remove the six screws that hold the shields and unhook the shields.
Step 4 Components
We disconnect all the components that are connected to the motherboard.
Step 5 Motherboard
We remove the two Phillips screws (PH # 00) that hold the base plate and with the help of a tool we will unhook it.
Step 6 Side push buttons
We take off the flex with lateral push buttons of the chassis.
Step 7 Headset and proximity sensor
We take off and remove the receiver and the proximity sensor, helping us with the necessary tools.
Step 8 Speaker
We extract the nine Phillips screws (PH # 00) that hold the shield and speaker, and remove them.
Step 9 Interconnection and battery flex
We disconnect the interconnection flex from the auxiliary plate, and take off the battery taking care not to damage it.
Step 10 Coaxial cable and auxiliary plate
Disconnect the coaxial cable and detach the auxiliary plate from the chassis.
Step 11 Full screen with chassis
Finally, we will only have to take off the vibrator of the chassis, now we will have to place all the components that we have removed in the new screen with chassis.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.