With a SIM removal tool we remove the SIM tray.

We heat the mobile at a temperature of 80 degrees for two minutes.

We introduce an opening tool to separate the back cover just enough to insert the cards and take off the back cover making the entire outline. If necessary, we will apply more heat.

Once removed the back cover removed.

Unscrew the Phillips screws (PH # 00) and separate the intermediate housing.

We disconnect the connection flex and remove it.

We disconnected the flex from the screen, disconnected the interconnection flex with charging connector, disconnected the flex from the battery and disconnected the interconnection flex.

We disconnected the interconnection flex, disconnected the coaxial cable, disconnected the four flexes that connect the front camera and disconnected the interconnection flex.

We remove the motherboard.

We disconnect and remove the two interconnection flexes. We disconnect the flex from the headset and disconnect the flex from the front camera.

We disconnect the flex from the lateral push button.

We remove the auxiliary plate.