Guide with all the necessary steps so that you can change the flex with SIM and SD card reader of the HTC One Mini 2 yourself.
In order to remove the back cover of the phone, first we will have to remove the top cover, since behind it there is a screw that holds this case.
We will heat a little to soften the glue, with care since we could damage it.
In the last photo we can see that behind the embellisher also hides an antenna flex. We will avoid as far as possible the areas where this flex is, if necessary we will slide the barb on the side of the screen.
To disconnect the battery, first remove the adhesive covering the flex cable. We remove the two Phillips screws (PH # 0) that hold the connector to the plate and we can unplug it. Now we can disconnect the coaxial cable from the central plate.
We will also disconnect the vibrator cable.