To begin we will have to extract the tray of the cards.
Step 2 Back case
We will remove the 2 Torx screws (T3) from the lower part of the casing, and with a metal spike we will unhook the whole casing. Once we take it out we will have to disconnect the flex from the fingerprint reader.
Step 3 Side button flex
Remove the Phillips screws (PH # 00) and the shield above the connector. Then we disconnect it, take it off and remove it.
Simply disconnecting the flex would be enough, we have preferred to remove it.
Step 4 Components
Remove the Phillips screws (PH # 00) that hold the shield that is above the connector of the coaxial cable, the battery and the interconnection flex, we must also disconnect the flex from the screen.
Step 5 Motherboard
We will remove the 5 Phillips screws (PH # 00) that hold the base plate and we can remove it.
Step 6
We remove the cameras to place them on the new motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.