To begin we will have to extract the tray of the cards.
Step 2 Back case
We will remove the 2 Torx screws (T3) from the lower part of the casing, and with a metal spike we will unhook the whole casing. Once we take it out we will have to disconnect the flex from the fingerprint reader.
Step 3 Side button flex
Remove the Phillips screws (PH # 00) and the shield above the connector. Then we disconnect it, take it off and remove it.
Simply disconnecting the flex would be enough, we have preferred to remove it.
Step 4 Components
Remove the Phillips screws (PH # 00) that hold the shield that is above the connector of the coaxial cable, the battery and the interconnection flex, we must also disconnect the flex from the screen.
Step 5 Motherboard
We will remove the 5 Phillips screws (PH # 00) that hold the base plate and we can remove it.
Step 6 Frontal camera
We remove the shield that covers the connector and we can remove the camera that we are going to change.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.