To be able to remove the back cover, first we will have to remove the two Torx screws (T3) that hold the housing at the bottom and also the SIM / SD tray.

We will introduce a flat opening tool between the housing and the frame. Sliding this around the contour, we will release the notches that hold it.

Remove the four Phillips screws (PH # 00) and disengage the internal housing with antenna.

Remove the eight Phillips screws (PH # 00) that hold the plate, remove the shielding and disconnect the components. Now we can undo the chassis plate.

All that remains is to disconnect the cameras from the motherboard.