We remove the SIM tray with a SIM removal tool.

Heat the terminal at 80 ° for 2 minutes to soften the adhesive on the back cover.

With the help of suckers we will introduce a metal prong between the back shell and the terminal. We will exchange it with a plastic pick to make the outline if it scratches the frame.

We will do all the contour until we get the back cover off.

Unscrew the Phillips screws (PH # 00) that hold the top antenna to the phone.

We will disconnect the flex from the fingerprint reader and remove the battery cover.

Unscrew the Phillips screws (PH # 00) that hold the lower inner shell.

We removed the speaker.

We disconnected the interconnection flex and the coaxial cable from the auxiliary plate.

We take off the auxiliary plate and remove it.