We remove the SIM tray with a SIM removal tool.

Heat the terminal at 80 ° for 2 minutes to soften the adhesive on the back cover.

With the help of suckers we will introduce a metal prong between the back shell and the terminal. We will exchange it with a plastic pick to make the outline if it scratches the frame.

We will do all the contour until we get the back cover off.

Unscrew the Phillips screws (PH # 00) that hold the top antenna to the phone.

We will disconnect the flex from the fingerprint reader and remove the battery cover.

We disconnected the interconnection flex and the battery flex.

Pulling the adhesives that hold the battery will detach it until it is removed.

We disconnect the flex from the screen and the coaxial cable.

We remove the motherboard.

We took off the receiver and removed it.

We take off the proximity sensor and remove it.

We take off the flex of the lateral push button and remove it.

Unscrew the Phillips screws (PH # 00) that hold the inner lower casing.

We unhook the speaker module and remove it.

We disconnected the interconnection flex and the coaxial cable from the auxiliary plate.

We take off the auxiliary plate.

We take off the vibrator and remove it.

We take off the interconnection flex and remove it.