First of all we must remove the tray from the cards.

We apply a little heat to the back cover to detach it with greater ease, for this we have used a double suction cup tool, and when we have managed to lift the casing a little we have taken advantage of to introduce a plastic pick to go off all the edges of the Case. Once the casing is removed, we remove the adhesive that is observed in the last two photos of this step.

We extract the seven Phillips screws (PH # 00) that hold the speaker module, and with the help of a flat tool we will unhook it.

To finish we will take off with a pair of tweezers the vibrator that we are going to replace.