To remove the back cover, we introduce an opening tool between it and the frame and doing lever movements we will unhook it.

In this step, we remove the fourteen Phillips screws (PH # 00) that hold the intermediate casing. Then, as in the back case, we will lever to unhook it.

Now we take off the flex push-buttons on the side of the chassis frame. We will also disconnect the battery and the digitizer.

Remove the two Phillips screws (PH # 00) that hold the motherboard but we still do not remove it.

To remove the motherboard, first disconnect the coaxial cable which we had forgotten. Then we will lift it from the top to disconnect the flex from the display.

All you have to do is unplug the camera from the motherboard.