We heat the screen at about 60 ° C for about a minute to soften the adhesive.
We introduce an opening tool between the frame and the screen and slide it around the contour.
Step 2 Disconnect screen
We remove the two Torx T5 screws that hold the shield of the screen connector and then disconnect it.
Step 3 Remove casing with frame
We remove the nine Torx T5 screws from the intermediate housing and unhook it by levering the notches that hold it.
Before removing it, we will disconnect the flex from the proximity sensor.
Step 4 Vibrator
To finish, we disconnect and take off the vibrator.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.