We will heat the back cover of the phone to soften the adhesive that holds it. Heating it to about 60 ° C for about 1 minute should be enough.

We will introduce an opening tool between this and the frame and sliding it around the contour, we will eliminate the adhesive.

Remove the seven Phillips screws (PH # 00) that hold the housing and then undo it.

We disconnect the components connected to the motherboard. The battery, the interconnection flex and the coaxial cable. Then we remove the two Phillips screws (PH @ # 00) that hold the plate.

To finish, we unbolt the base plate and remove it.

We will disconnect the front camera from the plate.