We will heat the back cover of the phone to soften the adhesive that holds it. Heating it to about 60 ° C for about 1 minute should be enough.

We will introduce an opening tool between this and the frame and sliding it around the contour, we will eliminate the adhesive.

Remove the seven Phillips screws (PH # 00) that hold the housing and then undo it.

We disconnected the battery and took it off the chassis.

Remove the six Phillips screws (PH # 00) that hold the speaker module and disengage it.

We disconnect the flex from the screen and and the interconnection flex with the motherboard.

It only remains to take off the vibrator and the auxiliary plate.