To start we will disconnect the external battery.

We unhook the back cover with a tool thin enough.

We remove the four Phillips screws (PH # 00) that hold the upper housing and with the help of a flat tool we will unhook it.

We disconnect the flex with the contacts of the external battery, and remove the coaxial cable that joins it to the motherboard.

Remove the eight Phillips screws (PH # 00) that hold the intermediate housing and remove it.

We disconnect the battery to work with greater security.

We remove the three Phillips screws (PH # 00) that hold the speaker module, and with the help of a flat tool we will unhook it.

We disconnect the components that are connected to the motherboard.

We disconnect and remove both cameras.

We disconnect the coaxial, remove the card tray, remove the three Phillips screws (PH # 00) that hold the motherboard, and when lifting it we must disconnect the coaxial cable that is connected by the bottom of the motherboard.

We remove the two Phillips screws (PH # 00) that hold the shield covering the audio connector, and once the shield is removed, we can remove the audio connector.

We take off the headset with the help of a thin metal spike.

We take off the flex with the side buttons.

We take off the battery with a tool which we can moisten with alcohol to soften the adhesive that holds it.

We remove the two coaxial cables.

To finish we only have to remove the auxiliary plate, for this we must remove the two Phillips screws (PH # 00) that holds it and with the help of a flat tool we will take it off.