To start we will disconnect the external battery.

We unhook the back cover with a tool thin enough.

We remove the four Phillips screws (PH # 00) that hold the upper housing and with the help of a flat tool we will unhook it.

We disconnect the flex with the contacts of the external battery, and remove the coaxial cable that joins it to the motherboard.

Remove the eight Phillips screws (PH # 00) that hold the intermediate housing and remove it.

We disconnect the battery to work with greater security.

We disconnect the components that are connected to the motherboard.

We disconnect and remove both cameras.

We disconnect the coaxial, remove the card tray, remove the three Phillips screws (PH # 00) that hold the motherboard, and when lifting it we must disconnect the coaxial cable that is connected by the bottom of the motherboard.

Finally, with the help of a tool thin enough we will take off the damaged headset that we have to replace.