We started by heating the screen at about 65 ° C for about a minute, to soften the adhesive. Then, with the hot screen, we introduce a flat tool between it and the casing, sliding it around the contour, to detach it.

We remove the Phillips screw (PH # 00) that holds the connector cover of the screen to disconnect it.

We remove the eleven Phillips screws (PH # 00) that hold the internal casing and disengage it.

We disconnect the components of the motherboard and remove the SIM / SD tray.

Unseat the base plate and remove the plastic cover that covers it underneath to be able to disconnect the interconnection flex, the fingerprint reader and the coaxial cable.

We remove the silicone that covers the fingerprint reader. On the other hand, we remove the metal plate that covers the housing to remove the reader.