We extract the eleven Phillips screws (PH # 00) that hold the back shell, and with the help of a flat tool we will unhook the back shell.

We remove the battery.

Remove the ten Phillips screws (PH # 00) that hold the intermediate housing and with a flat tool unhook the intermediate housing.

We take off the adhesive that is on top of the base plate in order to disconnect the flex from the screen, and we can now disconnect and remove both cameras.

Unplug and detach the components that are left on the motherboard, remove the three Phillips screws (PH # 00) that hold the motherboard, and lift it to the area where the battery was before, since underneath the motherboard is connected the interconnection flex.

Finally, with the help of a metallic tool we will remove all the silicone that surrounds the handset that we have to replace.