To remove the back cover we introduce a flat tool between it and the frame. Sliding it around the contour, we will release the notches that hold it.
It may be easier if we remove the top bezel first.
Step 2 Remove top trim
We heat the top plastic lid and take it off with a very thin flat tool. Then we remove the two Phillips screws (PH # 00) that hold the bezel and unlock it.
Step 3 Remove components
Remove the eight Phillips screws (PH # 00) that hold the upper inner shell, the connector shielding of the motherboard and the battery connector and remove them.
Step 4 Removing the motherboard
Now disconnect the components of the motherboard and remove the SIM / SD tray to finally disengage it.
Step 5 Motherboard
To finish, we will have to disconnect the cameras from the motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.