Manuales / Archos Diamond Gamma / Rear camera

Archos Diamond Gamma - Rear camera

Guide with all the steps necessary for you to change the components of the Archos Diamond Gamma (ACDIGA) yourself.

Difficulty

TutorialsSmartphonesArchosArchos Diamond GammaRear camera

For this tutorial you will need the following spared parts and tools

Opening tool Smartphone, tablet

2,19 €

Pinza antiestática ESD redondeada

3,06 €

Set of professional tools for opening smartphones and tablets

18,97 €

6-in-1 screwdriver, K-8107 with different heads, in blister

7,52 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Remove back casing

We start by removing the two Phillips screws (PH # 00) on the bottom that hold the case and then remove the SIM / SD tray.

We introduce a flat opening tool between the casing and the frame and by leveraging it we will be able to disengage it.

This casing is very well fitted and may be damaged in the process.

Step 2 Remove cover plate

Remove the Phillips screws (PH # 00) that hold the plate cover and connector shield and remove them. Then disconnect the components of the motherboard.

Step 3 Removing the motherboard

Remove the two Phillips screws (PH # 00) that hold the base plate and take off the rear camera or disconnect it when lifting the base plate.

Step 4 Rear camera

Now we just need to take off the camera from the chassis.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial