We start by removing the screen. To do this, first remove the two lower screws Pentalobe 0.8 (TS1). Then we will heat the screen to soften the adhesive which we will remove by sliding a flat tool around the contour of it.

Remove the four Phillips screws (PH # 000) and the three triwing screws (Y0.6) that hold the shields and then disconnect the flex from the screen.

To finish, we removed the screws five Phillips screws (PH # 000) and a trywing screw (Y0.6) that hold the speaker, we disengaged and took off the antenna.