In the lower part we will find two pentalobe screws TS1 (0.8mm) which we will remove.

To separate the screen, it will be advisable to have the right tool, otherwise we could break the flex cables of the screen. If we do not have the tool, it can be done with a normal suction cup or in the traditional way, prying at the edge of the screen.

We remove the shields from the connectors and disconnect the screen.

Remove the Phillips screws (PH # 00) that hold the haptic motor and the connector cover and remove them.

It is only left to remove the adhesive strips to be able to take off the battery.