Before you start, make sure your mobile is turned off.

Remove the SIM tray using the removal tool.

Remove the 2 Pentalobe screws.

The front panel has double-sided adhesive on the contour to ensure tightness.

We will use a suction cup and while we pull the screen, we review the contour with the metal opening tool.

Lift the front panel from the bottom, since the data flexes are connected at the top.

Remove the metal shield covering the connectors, held by 5 Phillips screws.

Disconnect the data flexes from the front panel to separate it.

Remove the small adhesive that hides one of the screws.

Remove the metal support from behind the camera, held by 2 Phillips screws.

Finally, disconnect the camera from the motherboard and gently pull the flex to remove it.