Before starting make sure that the equipment is turned off.

Remove the SIM card using the removal tool.

Remove the 2 Pentalobe screws that secure the front panel to the housing.

In this model, unlike its predecessors, the opening suction cups are not going to be as useful, as it has a small strip of adhesive to ensure the tightness of the equipment.

Instead, we will use a suction cup and while we pull the screen, we review the outline with the flat part of the plastic stick.

Little by little, starting from the bottom, we will take off the front panel.

Remove the 4 Phillips screws that we will find in the metal cover that covers the connections of the screen.

Unplug the flexes on the motherboard to separate the screen.

Remove the 2 marked Phillips screws.

Remove the metal cover that holds the rear camera.

Finally, disconnect and remove the rear camera.