First, we apply heat to the terminal on the screen part to soften the adhesive and be able to separate them.

Next we extract the two Pentalobe type screws (TS1) and with the help of suction cups and a fine opening tool we separate the screen from the terminal until it is detached from the chassis

We remove the Triwing screws (Y0.6) from both shields that are shown in the first photo of this step and remove them.

Now we disconnect the battery and the flexes that join the screen to the terminal chassis in order to separate them.

With the help of a fine tool we lift the battery adhesive and with a pair of tweezers we remove it once the battery is removed, it will remain loose we can lift it and extract it from its housing.