To begin, we must remove the two Pentalobe 0.8 (TS1) screws from the bottom of the housing, apply some heat to soften the adhesive, and with the help of a tool with suction cups we will take off the chassis screen.

We disconnect the battery connector to work with greater safety.

We remove the five Triwing screws (Y0.6) that hold the shield, and once removed we can disconnect the flex from the screen and the headset module.

We remove the tray from the cards.

We remove the three Phillips screws (PH # 00) that hold the fingerprint reader, we also remove the flat female screw that holds the shield and we will remove it, disconnect the reader, and we can now remove the damaged reader that we have to replace.