Inserting a tool flat or directly with your fingers, we will leverage to unhook the lid of the internal casing.

We remove the battery and remove the thirteen Phillips screws (PH # 00) that hold the inner casing and unhook it by prying it with a flat tool.

Take off the flex of lateral push buttons and disconnect the rest of the components of the motherboard.

We remove the two Phillips screws (PH # 00) that hold the plate to the chassis and remove it.

We disconnect the flex from the motherboard and detach the flex from the touch screen of the chassis. Then we will heat the screen at about 60 ° C for about a minute.

With the hot screen, we introduce a flat tool between it and the frame which we will slide around the contour to take it off.

All that remains is to take off the touch screen of the LCD.