To begin with, we'll take off the back cover. For this we must apply heat, and to avoid scratches on the screen we put a protector, and to take off the back cover we will help a metal pick and an opening card, once detached disconnect the flex fingerprint reader.

Remove the 11 Phillips screws (PH # 00) and we can remove the intermediate casing.

We remove the rear camera, and disconnect the other components of the motherboard.

Remove the 2 Phillips screws (PH # 00) that hold the motherboard, and we must remove the tray.

We take off the vibrator and proceed to desolder the vibrator that we are going to replace.