To begin with, we'll take off the back cover. For this we must apply heat, and to avoid scratches on the screen we put a protector, and to take off the back cover we will help a metal pick and an opening card, once detached disconnect the flex fingerprint reader.

Remove the 11 Phillips screws (PH # 00) and we can remove the intermediate casing.

We remove the rear camera, and disconnect the other components of the motherboard.

Remove the 2 Phillips screws (PH # 00) that hold the motherboard, and we must remove the tray.

Remove the 4 Phillips screws (PH # 00), and proceed to remove the antenna module with loudspeaker and the auxiliary plate.

Take off the battery, remove the 6 Phillips screws that hold the shield, and take off the flex screen.

We apply heat to the screen and introduce a plastic spike or those that we need, and we are taking off all the edges of the screen.