To begin with, in this guide it will only be necessary to remove the four Triwing screws (Y0.6), unhook the housing with the help of a fine tool, and disconnect the flex that joins the two housings and the vibrator connector.

We extract the two Phillips screws (PH # 00) that hold the side buttons to work with greater comfort.

We remove the vibrator to later disconnect the cable from the antenna with greater ease.

We disconnect and remove the bluetooth antenna.

We remove the three Phillips screws (PH # 00) of the red knob to remove the battery holder and the ZR button.

Remove the two Phillips screws (PH # 00) that hold the joystick of the red knob, and we will extract it.

We disconnect the flex from the side buttons.

Disconnect the components that are connected to the plate, and remove the two Phillips screws (PH # 00) that hold the plate, and we can remove it.

We take off the infrared sensor.

To finish, we will only have to take off the damaged NFC antenna that we have to change.