To begin, we must unhook the straps to be able to work with greater comfort.

We apply heat to the case to soften the adhesive a bit, and with the help of a fine tool we will unhook the edges of the case, and then we will disconnect the flex that is glued to the back case from the motherboard.

We remove the shield that covers the screen connector, remove the five Phillips screws (PH # 00) that hold the motherboard and the battery, and with the help of a flat-tipped tool we will lift it.

Finally we will apply calos to the screen to soften the adhesive that holds it, and with the help of a fine tool we will unhook the damaged screen that we have to replace.