To start we will unhook the straps to work on the watch with greater comfort.
Step 2 Back case
We remove the four Pentalobe screws (TS1), and with the help of a thin tool we will unhook the back cover taking care with the flex.
Step 3 Battery
Remove the two Phillips screws (PH # 00) that hold the shield, disconnect the battery connector, and with the help of a flat tool we will take it off.
Step 4 Back housing with components
Remove the Phillips screw (PH # 00) that holds the shield, and disconnect the flex with components that are attached to the back cover from the motherboard.
Step 5 Components
Remove the Phillips screw (PH # 00) that holds the shield, and disconnect all components that are connected from the motherboard.
Step 6 Fullscreen
We remove the four Phillips screws (PH # 00) that hold the intermediate housing and the base plate to the screen, and with the help of a flat tool we will make a small lever to unhook the screen housing.
Step 7 Side push buttons
Using a thin tool and tweezers we will take off the flex with the side buttons that we are going to replace.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.